— 15 —
PARAMETER
STEPS
LEFT DISPLAY
RIGHT DISPLAY
Press
SELECT
OPTIONS
Press
DEGREES F or C
F or C
Press to select Fahrenheit or Celsius.
DEGREES F or C
F or C
Press when complete.
PROGRAM
Press
SELECT
OPTIONS
Press
SET PASS
NEW PASS
Press to select NO PASS.
NO PASS
NEW PASS
Press when complete.
PROGRAM
Press
SELECT
OPTIONS
Press
SET PASS
NEW PASS
Press to select PASS REQ.
PASS REQ
NEW PASS
Press and enter numeric code.
CODE XXXX
NEW PASS
Press when complete.
PROGRAM
Press
SELECT OPTIONS
OPTIONS
Press
VOLUME #
BEEPER
Press to select volume.
1, 2 or 3
BEEPER
Press when complete.
PROGRAM
Fahrenheit or
Celsius
No Password
Required
Password
Required
Beeper
Volume
PROGRAMMING
Temperature, time and other parameters must be set before operating. Follow the Program Guide to
configure the fryer to your particular operation.
Programming Guide
Press
to enter into the program mode, then follow the steps under each parameter to enter the
desired information. To exit the parameter and save changes, press
. To exit the program
completely, press
again.
NOTE:
To use set back parameter, the fryer must be supplied with basket lifts.
Summary of Contents for ERC50
Page 27: ... 27 NOTES ...
