E36LC SERIES ELECTRIC RESTAURANT RANGES - REMOVAL AND REPLACEMENT OF PARTS
F25297 (July 2008)
Page 6 of 28
BLOWER MOTOR
1.
Remove blower wheel as outlined under
BLOWER WHEEL.
2.
Remove nuts securing mounting plate to motor.
3.
Remove mounting plate from motor.
4.
Disconnect lead wires from motor.
5.
Reverse procedure to install.
6.
Check range for proper operation.
DOOR
Removal
1.
Remove kick panel as outlined under COVERS
AND PANELS.
2.
Pinch a rag in the door to prevent the door from
falling open during procedure.
3.
Loosen nuts while holding "J" hooks from
rotating.
NOTE:
One nut will be right hand threaded and the
other will be left hand threaded.
4.
Rotate turnbuckle to relieve most of the spring
tension.
5.
Pry up left bell crank and remove oven door
hook.
6.
Repeat with right bell crank.