E36LC SERIES ELECTRIC RESTAURANT RANGES - REMOVAL AND REPLACEMENT OF PARTS
F25297 (July 2008)
Page 12 of 28
OVEN THERMOSTAT
1.
Remove thermostat knob.
2.
Remove thermostat mounting screws.
3.
Open the control panel as outlined under
COVERS AND PANELS.
4.
Disconnect the lead wires from the thermostat
noting their locations.
5.
Remove thermostat bulb from heating element
shroud.
6.
Remove left range top as outlined under
RANGE TOPS.
7.
Pull capillary tube and thermostat bulb through
roof of oven cavity.
8.
Remove thermostat.
NOTE:
Do not kink capillary tube.
9.
Reverse procedure to install.
NOTE:
Route capillary tube so it does not contact
any electrical component.
10. Perform OVEN THERMOSTAT CALIBRATION
as outlined under SERVICE PROCEDURES
AND ADJUSTMENTS.
11. Check range for proper operation.