E36LC SERIES ELECTRIC RESTAURANT RANGES - REMOVAL AND REPLACEMENT OF PARTS
F25297 (July 2008)
Page 8 of 28
7.
Remove bell crank pins and bell cranks.
8.
Reverse procedure to install.
9.
Check range for proper operation.
NOTE:
Tension springs until door closes on its own
when held open 5 inches. Door should bounce once
or not at all.
DOOR SWITCH
1.
Open kick panel as outlined under COVERS
AND PANELS.
2.
Remove door switch bracket mounting screws.
3.
Remove nuts securing door switch to door
switch bracket.
4.
Disconnect electrical wiring from switch.
5.
Reverse procedure to install.
6.
Check range for proper operation.
OVEN HEATING ELEMENT
1.
Remove oven racks.
2.
Remove thermostat bulb from heating element
shroud.
3.
Remove heating element shroud.
4.
Remove screws mounting heating element
brackets to oven back wall.