VTL TP2.5 Owner'S Manual Download Page 26

Page: 26 / 26

A P P E N D I X

Warranty Registration

Warranty registration for VTL products is valid in the USA only. International VTL
customers should consult their local VTL dealer regarding product registration and
warranty procedures.

To obtain valid US warranty service, please fill out the enclosed VTL Warranty
Registration card and mail it to the following address with a

COPY OF YOUR

ORIGINAL BILL OF SALE

within the first thirty days of purchase:

VTL Warranty Registration
4774 Murrieta Street, Suite 10
Chino, CA 91710
USA

To help you keep a record of the serial number and purchase information, please enter
the following information into this manual.

Product Model Number:

___________________________

Serial Number:

___________________________

Purchase Date:

___________________________

Authorized Dealer:

___________________________

Service Notes

Date

Service

Initials

___________

__________________________

_____

___________

__________________________

_____

___________

__________________________

_____

___________

__________________________

_____

___________

__________________________

_____

___________

__________________________

_____

TP2.5 Preamplifier Owner’s Manual
VTL

Summary of Contents for TP2.5



























Search results

Summary of Contents for TP2.5

Reviews:

Related manuals for TP2.5

Brands by name

Popular brands

VTL TP2.5, Owner'S Manual

Search results

Summary of Contents for TP2.5

Reviews:

Related manuals for TP2.5

Brands by name

Popular brands