27
ITAD OPERATION
6. Press SELECT until the desired minute is announced. Holding the key continuously will
increase the minute in 10 minute steps.
7. Press TIME/SET to confirm your choice. You will hear the Day and Time.
Set Audible Message Alert
If you want your ITAD to beep once every 10
seconds to notify you when new messages have
been received, set the
Audible Message Alert to ON. Otherwise, it is
preset to OFF.
1. Press MENU until you hear “Set audible
message alert.”
2.
Press SELECT until the desired setting,
(ON or OFF) is announced.
3.
Press TIME/SET to confirm your choice.
The voice prompt of “Audible Message
Alert On” or “ Audible Message Alert Off” will be
produced.
Note: You can press any ITAD function key except PAGE key to stop the audible message
alert.
Set Announce Only
Caution: If you turn on the Announce Only option, your callers cannot leave a message. This
setting is preset at the factory to Announce Only OFF.
1.
Press MENU until “Set Announce Only” is
announced.
2.
Press TIME/SET now will announce the
current setting.
3.
Press SELECT until desired setting- “on”
or “off” is declared.
4.
Press TIME/SET to confirm and the set-
ting will be announced.
Note: You can store one Outgoing Message
(OGM) for ANNOUNCE ONLY mode, and a
separate OGM for NORMAL (accept mes-
sages) mode. Depending on the Announce
Only Setting, the appropriate OGM will be se-
lected.
Set Base Ringer On/Off
The Base ringer can be turned on or off.
1. Press MENU until you hear “Set Base Ringer”
2. Press SELECT to toggle between the choices (on or off)
3. Press TIME/SET to confirm your selection. Voice prompt of “Base Ringer is on” or “Base
Ringer is off” will be announced to confirm your setting.
A
D
V
ANCED OPERA
TION
MENU KEY
SELECT KEY
TIME/SET KEY
MENU KEY
SELECT KEY
TIME/SET KEY
