26
ITAD OPERATION
Recording/Playing/Deleting the Out-
going Messages (OGM)
1.Press MENU key until the desired item
(Set Outgoing Message) is announced.
2.Press REC/MEMO. “Now record
ing”,
is announced, followed by a beep. Speak
in the direction of the ITAD (max. length:
90 seconds).
3.Press MAILBOX X to stop the record-
ing.
4.The OGM replays the message auto-
matically, followed by a beep.
5.To review a recorded announcement,
press MENU key until the desired item
(Set outgoing message) is announced.
Press any MAILBOX key. The current greeting is played.
6. To delete a recorded announcement, press DELETE during OGM playback.
Note: If your recording time is less than 2 seconds, your OGM will not be recorded, and the
default greeting will be used.
Set Security Code
The security code programmed into the ITAD is
used to gain access to functions from remote
locations.
The security code default setting is 19.
1.
Press MENU until you hear “Set security
code.”
2.
Press TIME/SET to hear the current
security code.
3.
Press SELECT briefly to increase the se-
curity code by 1. Or, hold SELECT continu-
ously to increase the code by multiples of 10.
4.
Press TIME/SET to confirm your choice
and you will hear the announcement of the se-
curity code.
Day and Time Setup
During initial setup, or after a power failure, the
day and time default is set to Monday 12:00am.
The display will flash
“CL” to indicate day and
time need to be set.
1.
Press MENU until you hear, “Set day and
time.”
2.
Press SELECT until the desired day is an-
nounced.
3.
Press TIME/SET to confirm your choice.
4.
Press SELECT until the desired hour is
announced.
5.
Press TIME/SET to confirm your choice.
A
D
V
ANCED OPERA
TION
MENU KEY
SELECT KEY
TIME/SET KEY
REC/MEMO KEY
MAILBOX X
(1,2&3 ) KEY
MENU KEY
SELECT KEY
MENU KEY
SELECT KEY
TIME/SET KEY
