5
2.1. Connect base unit
The DC power cable is already connected to the base unit. Plug the other end
into the
VCS702A
jack of the power adapter. Route the cord through the slots.
Plug one end of the telephone line cord into the
Tel lIne
jack of the power
adapter, and plug the other end into a wall jack.
Plug the small end of the AC power cord into the power adapter, and plug the
large end into the wall outlet not controlled by a switch.
NOTE
Always use the cables provided in the box.
1.
2.
3.
2. SeT UP YoUR PHone
If you have a broadband line
If you connect your telephone to a line with a broadband connection, you will need
to insert a micro-filter between the telephone and the telephone line. Otherwise,
there may be interference between the telephone and the broadband, which could
cause problems.
In a fixed line with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to. If you need
more broadband micro-filters, contact your broadband supplier.
Wall jack
1
TEL LINE
VCS702
2
3
Wall outlet
dSl filter (optional,
not included)
dC power
cable
Slots
AC power cord
Telephone line
cord
1
TEL LINE
VCS702
2
3
E
VCS702A
