background image

30

9.      TeCHnICAl SPeCIfICATIonS

Transmit 
frequency

DECT 1880 - 1900 MHz

Indoor range 
(wireless 
microphone 
unit)

Up to 10 metres*

Battery Life 
(wireless 
microphone 
unit) (average 
values)

Up to 12 hours talk time**
Up to 70 hours standby**

Number of 
wireless 
microphone 
units connected 
to the base unit

Up to 2

Electrical 
connection/
Base mains 
adaptor

Base main adaptor (interface module):
Model No.: S018AGP0900150, manufactured by Ten Pao 
International Ltd.
Input: 100-240 V/50-60 Hz/500mA Output: 9VDC/1500mA
Only use the adaptor supplied with telephone. Single-phase AC, 
excluding IT install defined by the EN60950-1 standard.
Caution: The network voltage is classified as hazard by the 
criteria of this standard.

Telephone 
connection

Appliance designed for connection to a TNV3 class 
(telecommunications network voltage) analogue telephone line as 
defined by the EN60950-1 standard.

Batteries

Battery pack: 2.4 V 400mAh (Ni-MH), Corun Ni-MH29AAA400x2 
or GPI GP40AAAM2BMXZ 
Only use the batteries supplied with the telephone. Use any 
other type of battery presents a risk of explosion. Used batteries 
must be disposed of in compliance with current environmental 
protection regulations.

Operating 
temperature

From 5°C to 40°C

* Values may vary according to environment.
** Depending on initial battery charge.

Summary of Contents for VCS702A




































Reviews: