www.vtechphones.com
1
2
Installation
For optimum performance of your cordless telephone
system, choose a central location close to a telephone
jack and a power outlet not connected to a switch . The
base unit can be place�� on a ��at su��ace o� �ounte��
can be place�� on a ��at su��ace o� �ounte��
on the wall . For maximum range and best reception,
place the base unit in a high and open location .
base unit in a high and open location .
in a high and open location .
Avoid putting the base unit too close to:
• communication devices such as personal computers,
communication devices such as personal computers,
computer routers, television sets, VCRs, wireless
�oute�s (wi�eless b�oa��ban��, 802.1.1 �oute�s, wi-fi,
etc .) and other cordless telephones, etc .
• excessive heat sources such as radiators, ventilation
excessive heat sources such as radiators, ventilation
ducts, and direct sunlight .
• noise sou�ces such as a win��ow with hea��� t�a�fic
noise sou�ces such as a win��ow with hea��� t�a�fic
outside, motors, microwave ovens, refrigerators,
an�� ��uo�escent lighting.
• excessive dust sources such as: workshop, garage,
excessive dust sources such as: workshop, garage,
etc .
• excessive moisture sources such as bathroom,
excessive moisture sources such as bathroom,
sources such as bathroom,
such as bathroom,
kitchen, sauna, or greenhouse .
• extremely low temperature such as garage .
extremely low temperature such as garage .
• mechanical vibration or shock such as on top of the
mechanical vibration or shock such as on top of the
washing machine .
Install handset battery
• Use only the VTech
battery and AC power
adapter supplied with this
unit or the recommended
equivalent .
• Do not open or mutilate
Do not open or mutilate
the battery . Released
electrolyte is corrosive
and may cause damage
to the eyes or skin . It may
be toxic if swallowed .
• Exercise care in handling
Exercise care in handling
batteries in order not to
create a short circuit with
conducting materials
such as rings, bracelets,
and keys . The battery or
conductor may overheat
and cause burns .
• Do not dispose of the
Do not dispose of the
batte��� in a fi�e; it �ight
explode .
• Return the handset to
Return the handset to
the base unit when not in
use to ensure optimum
performance .
Choose a location
1 . Plug the battery connector securely into the jack inside
the battery compartment according to the color-coded
label .
2 . Insert battery in the center of the battery compartment .
3 . Press down on the wired side until the battery securely
snaps into place .
4 . Neatly tuck the wires next to the battery inside the battery
compartment .
5 . Position the battery compartment cover and slide it
towards the unit until it clicks into place .
6 . Put the handset in the base unit to start charging the new
battery for at least 16 hours .
Red
wire
Red
wire
Black
wire
Black
wire
