Ge
TTING sT
aRTeD
Battery Installation
Battery Installation
• Make sure the unit is turned OFF
.
• Locate the battery covers on the back of the unit.
• Remove the covers as illustrated.
• Insert 4 X 1.5
v size AA AM-3 or LR6 batteries
(not included) as illustrated.
• Make sure to replace the battery covers.
BATTERy NOTICE
• Install batteries correctly observing the polarity (
+
,
-
) signs to avoid leakage.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are only to be charged under adult supervision (if removable).
• Rechargeable batteries are to be removed from the toy before being charged
(if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (Ni-MH).
• Remove the batteries from the equipment when the unit will not be used for
an extended period of time.
• Always remove exhausted batteries from the equipment.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
NoTe:
When the
MobiGo
®
2
is running on batteries,
you may see this icon appear on the screen
. This
indicates that battery power is low, and you should replace
the batteries soon. Battery time remaining once the icon
first appears is approximately 10-30 minutes, depending on
the type of batteries in use.
To preserve battery life,
MobiGo
®
2
will automatically turn
off after several minutes without input. Press the ON/OFF
button to turn the
MobiGo
®
2
on again.
3
135800 MobiGo2 M 20120510.indd 3
2012-5-30 10:17:11