4
Getting Started
Setup
Charging of the Handset Battery Pack
The handset of your cordless telephone is powered by a rechargeable battery
pack. It charges automatically whenever handset is in its charger.
You should charge the batteries for 10-12 hours when you first receive your
phone. You will know the battery pack needs charging when:
• The low battery message is displayed:
• The handset seems completely dead, the LCD is
completely clear and does not activate when you
press the keys.
Note: While in PLACE IN CHARGER (low battery)
mode, the keypad sounds, backlighting and speak-
erphone features will not work. When the battery has been charged, the features
will return to their normal function.
IMPORTANT:
1. Do not dispose of the battery pack in a fire, it might explode.
2. Do not open or mutilate the battery pack. Toxic substances may be released,
causing harm to eyes or skin.
3. Exercise care in handling batteries in order to prevent an accidental short of
the charge contacts, potentially causing the batteries to overheat.
Installation of Battery Pack in Handset
Follow the steps below:
. Remove the battery compartment
cover by pressing on the indentation
and sliding downward. Place the new
battery pack in the handset with the
positive and negative poles aligned in
the battery compartment.
2. Replace the battery cover by sliding it
upwards.
3. If the new battery pack is not already
charged, place the handset in its
charger, and allow it to charge for
0-2 hours. After initial charge, a
maintenance charge of 8 hours should
be sufficient.
Connecting power to Base Unit/Hand-
set Charger
. Plug the power adapter into an electrical
outlet, and the connector into the connec-
tor jack at the bottom of the base unit.
2. Choose the location for your handset charger,
and plug its power supply into an electrical
outlet.
