66
67
10.8 Set the Room Monitor
You can set your registered handset(s) as a room monitor. You can
save an internal or external number in the handset as the destination
number, and then activate the room monitor, the previously saved
destination number will be called automatically, as soon as a set
noise level is reached. All handset keys will be deactivated, except
the two soft keys shown on screen and .
The room monitor call to an external number will be terminated after
around 90 seconds, no matter the call is answered or not. While
call to an internal number (another handset) will be terminated after
around 100 seconds as well if no body answers it. When room
monitor call is triggered, press to end the call.
When the room monitor is activated, the keypad will be disabled
except the two soft keys, no call can be made on the room monitor
handset. Incoming calls to the handset are indicated without ringtone
and only shown on the screen. The display will be in dim mode,
keypad will not be illuminated and advisory tones will also be turned
off. The vibration alert will be disabled. Vibration alert settings will be
resumed after room monitor is deactivated.
If you accept an incoming call, the room monitor will be suspended
for the call duration, but will be resumed after the call ended.
NOTES
You should always check and verify the operation of the room
monitor before use, to ensure it is working normally.
Enabling this feature will reduce the operating time of the handset
considerably. Please place the handset in the base/charging
cradle to ensure the battery does not run down.
Please put the handset directly towards the baby. But should be
1-2 metres away from the baby.
The connection to which the room monitor is diverted must not be
blocked by any activated answering machine.
1.
2.
3.
4.
