24
25
If there is free pairing slot, the screen displays
Place Bluetooth
headset next to the base
.
Press
OK
.
If there are already four paired devices on the device list, the
screen displays
Maximum of 4 devices can be paired
. Follow the
instructions to replace a device and remove it from the paired list.
The screen displays
Please set your headset to discoverable
mode.
The telephone base is in discoverable mode. Set your
headset to discoverable mode (refer to the user’s manual of your
headset), then press
OK
.
All devices that are connected to the telephone base are
disconnected until the pairing process completes.
The screen displays
Searching for Bluetooth headset...
When the screen displays the found devices, press ▲/▼ to
highlight your desired headset and then press
OK
.
Enter the PIN of your headset. The PIN for most Bluetooth
devices is
0000
(refer to the user’s manual of your headset).
Then press
OK
.
The handset displays
Pairing is in progress
, then
Paired with
Headset
when the operation is successful. Press
OK
.
If there is another headset already active, the screen shows
Only 1 headset can be connected.
and prompts you to replace
an existing active device. Follow the instructions to remove the
handset from the Active Device list.
The handset then displays
Headset X is paired to the base.
Connect now?
. Press
Yes
to connect.
If there are already two connected handsets on the Active
Device list, the handset shows
Maximum of 2 devices can
be connected
. Follow the instructions to replace a device and
remove it from the Active Device list.
The handset displays
Connecting Headset X to the base...
,
then
Headset setup is completed. Device is connected.
when
the operation is successful.
3.
4.
5.
6.
7.
8.
9.
10.
