How to set 2 locks control
The monitor can be set to control 2 locks while you should set the unlock
menu item to “on “ state.
The code number of 8015 is used to set the unlock menu off (by default) that
it can only control one lock.
The code number of 8014 is used to set the unlock menu on that it can control
two locks.
Note:
1. During talking or monitoring state, press
UNLOCK
button,two unlock icons will be
shown. Select the item you want, and then
it will release the corresponding door(The
code number of 8014 is used to set the un-
lock menu on).
2. Note that the restore to default operation
will not change the parameters setting.
DS-1 00:30
How to set the main menu version
There are two main menu version to choose for the monitor:Full-featured ver-
sion and Simplified version(by default) .
The code of 9006 is used to set the simplified version main menu(by default).
The code of 9007 is used to set the full-featured version main menu.
Specification:
· Power Supply:
· Power Consumption:
· Monitor Screen:
· Display Resolutions:
· Video Signal:
· Wiring:
· Dimension:
DC 20-28V
Standby 0.286W; Working status 3.224W
3.9 inch digital color TFT
800(R, G, B) x 480 pixels
1Vp-
p, 75Ω, CCIR standard
2 wires, non-polarity
138(H)×138(W)×19(D)mm
-9-
Summary of Contents for DT39
Page 11: ...Note 11 ...