30
Call transfer using intercom
While on an outside call, you can use
the intercom feature to transfer the call
from one device to another.
Press
INT
on the handset during a
call. The current call is put on hold.
Your handset shows
Intercom
to:
Use the dialing keys to enter a
handset number (
1
-
5
).
Your handset shows
Calling HS X
.
The destination handset rings and
shows
HS X is calling
.
3. To answer the intercom call on the
destination handset, press
/HOME
,
/CELL
, , or any dialing key (
0
-
9
,
,
or
). Both handsets now show
Intercom
.
-OR-
To answer the intercom call on the
destination headset, press
ON/OFF
key on the headset.
4. To transfer the call, press
OFF
on the
initiating handset or place the initiating
handset back in the telephone base or
charger.
5. To end the call, press
OFF
on the
destination handset or place the
destination handset back in the
telephone base or charger.
-OR-
Press
ON/OFF
key on the headset.
NOTES
You can cancel the intercom call before it
is answered by pressing
OFF
.
If the destination handset does not
answer the intercom call within 100
seconds, or if it is out of range, on a call,
or accessing the phonebook or caller ID
log, your handset displays
Unable to call
and then returns to idle mode.
You can press
OFF
or
MUTE
on the
destination handset to temporarily
silence the intercom ringer.
Only one intercom call can be established
at a time.
1.
.
•
•
•
•
Phonebook
The phonebook can store up to
1000 entries, which are shared by all
handsets. Each entry may consist of a
telephone number up to 30 digits, and a
name up to 15 characters.
Any additions, deletions or edits made
on one handset will be reflected on
other handsets.
If the telephone number in the
phonebook exceeds 15 digits, a dash
appears after the 14th digit and then the
remaining digits are shown beginning
with a dash alternately.
Add a phonebook entry
Enter the number when the handset
is not in use. Press
SELECT
, then go
to Step 5.
-OR-
Press
MENU
when the handset is not
in use.
. Press
or
to choose
Phonebook
,
and then press
SELECT
.
3. Press
SELECT
again to choose
Add
new entry
.
4. When
Enter number
displays, use the
dialing keys to enter
a number (up to 30
digits).
-OR-
Copy a number from the redial list by
pressing
REDIAL
. Then press
,
or
REDIAL
repeatedly to find
the desired number. Press
SELECT
to copy the number.
Press
SELECT
to move on to the
name.
1.
5.
Enter number
ECO
ANS ON
-
