3
Getting Started
NOTE: Please keep instruction manual as it contains
important information.
Unlock the packaging locks:
rotate the packaging locks 90 degrees
counter-clockwise.
Pull out the packaging locks.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned
Make sure the unit is turned
OFF
.
2. Locate the battery cover on the bottom
of the unit. Use a coin or screwdriver
to loosen the screw.
3. Install 3 new “aa” size (aM-3/Lr6)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance.)
4. replace the battery cover and tighten
the screw to secure the battery cover.
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum
performance.
• non-rechargeable batteries are not to be recharged.
• rechargeable batteries are to be removed from the toy before being
charged (if removable).