VTech 3111-2 User Manual Download Page 20

Page: 20 / 61

www.vtechphones.com

Basic operation

Make, answer and end calls

• To make a call, press

FLASH

or , then dial the number.

-OR-

Dial the number, and then press

/FLASH

(predial).

• To answer a call, press

/FLASH,

or any dialing keys (

0-9,

#, *

• To end a call, press

OFF/CLEAR

, or put the handset in the

telephone base or charger.

Speakerphone

• During a call, press

on the handset to select between

speakerphone and normal handset use.

Mute

This feature allows you to silence the microphone during a

conversation. You can still hear the caller, but the caller cannot

hear you.
• To activate the mute feature during a call, press

MUTE/REMOVE

on the handset. The screen will display

MUTE

• Press

MUTE/REMOVE

again to resume the conversation.

PHONE 00:00:01

MUTED

MUTE

• The screen

displays

the elapsed time

as you talk (in

hours, minutes

and seconds).

• While entering

a number to dial

before

/FLASH

is pressed, press

MUTE/REMOVE

OFF/CLEAR

backspace.

• Press and hold

REDIAL/PAUSE

to insert a three-

second pause.

Summary of Contents for 3111-2






























































Search results

Summary of Contents for 3111-2

Reviews:

Related manuals for 3111-2

Brands by name

Popular brands

VTech 3111-2, User Manual

Search results

Summary of Contents for 3111-2

Reviews:

Related manuals for 3111-2

Brands by name

Popular brands