Vstone Robovie-X, Assembly Manual, Page: 68 / 73

Oscillate the neck to the right and left to check whether or not the cables are too tight.
03. Wiring Check (Neck)
If the cables are bundled too short in the rear, they will not only hinder robot movements,
but damage the servo motors or cause snapping or short-circuit.
If they are slackened too much, the robot will be caught by them,
damaging the servo motors or causing snapping or short-circuit.
Move each of the robot joints to recheck whether or not the cables are too tight.
The following checks the noteworthy areas.
Wiring Check
67 67