Vstone Robovie-X, Assembly Manual, Page: 66 / 73

01. Mounting the Armor Panel (Rear)
When this is done, ensure that they are not caught.
If they are bundled too short,
they will not only hinder robot movements,
but damage the servo motors or cause snapping
or short-circuit.
M2-
4
Bundle the cables in the rear and mount the armor.
<Wiring Example>
Bundle the cables in the center of the body
so that they will not be caught
between the armor and the aluminum parts.
<Wiring Example>
When the gyro sensor* is mounted;
When the gyro sensor is mounted,
bundle its wiring in the center as well.
(* Optional)
B
65 65