2. GETTING STARTED
2.1 Inspection/Damage Claims
a) Examine all components thoroughly as soon as received. If damaged, write a complete and detailed description of
the damage on the face of the freight bill. Have the carrier's agent sign the description.
b) Notify the delivering carrier of damage or loss immediately. This may be done either in person or by telephone.
Written confirmation must be mailed within 48 hours.
c) Risk of loss or damage to merchandise remains with the buyer. It is the buyer's responsibility to file a claim with
the carrier involved.
d) If you need assistance contact your distributor or the VST factory representative.
2.2 Parts Verification
Prior to starting work, make sure that all of the correct parts have been received.
You will also need the following partial list of parts to complete the installation:
1. Pulsers for each dispenser - 1, 10 , 100 or 500 pulses/gallon
2. A Single Pole Double Throw (SPDT) or Double Pole Double Throw (DPDT) switch
activated by the dispenser handle.
3. An Electric Reset (optional).
4. A Junction box of sufficient volume for each dispenser.
2.3 Return Shipping
All return shipments of VST products must be prepaid. Return items in their original shipping containers. VST will
accept no liability for damage caused by improper packing. Address the shipment to:
Service Department
VST Fuel Management, Inc.
2238 N. Los Alamos
Mesa, Arizona 85213
3. SITE PREPARATION
3.1 Mounting the VST Fuel S-810
VST, 2010
7
