4
Hardware Configuration
4.2.2 Show Port Configurations (1)
> 1
Port 1: RS232
Port 2: RS232
Figure 20: Show all port configurations
The command ’1’ in the Main Menu lists the current configuration of all serial ports in the USB-
COM PRO. This example is for a USB-2COM PRO with both ports in RS232 mode. The list is
followed by the Main Menu again.
4.2.3 Change Port Configuration (2)
'
&
$
%
> 2
0 - Back
---------------
1 - Port 1
2 - Port 2
---------------
3 - All Ports
>
Figure 21: Change port configurations
Command ’2’ allows to change the configuration of some ports. The ports may be selected individ-
ually, or all at once for common configuration.
0
Selects the Main Menu again.
1
Selects the first serial port.
2
Selects the second serial port.
3
Selects all serial ports at once. This number changes depending on the number of available serial
ports.
For this example port 1 is selected for configuration. To get details about the available modes
please read section
2.2
.
June 2009
USB-COM PRO User Manual
24
