4
Hardware Configuration
Figure 14: UsbComCfg started
If a device is not in Configuration mode, it is not detected. It is also not possible to find a device,
when the first serial port is used by an application software. UsbComCfg repeats the search when
the appropriate button is clicked.
By clicking a device in the left pane, a port in the middle pane can be selected. The operation mode
is then changed by the radio buttons and check boxes in the right pane. The button to “Commit
Changes” transfers the required parameters to the selected device. They are stored in non-volatile
RAM, and activated after that. The device remains in Configuration mode.
June 2009
USB-COM PRO User Manual
20
