I-TrIM & SHAVE
PrODUCT FEATUrES
• Trimmer blades: W-Tech - stainless steel
• 1 cutting guide for 21 lengths (from 0.5 mm to 10.5 mm, in 0.5 mm
increments)
• Dual shaving head with nickel foils
• 3-position switch: trimmer/off/shaver
• Grooved wheel to adjust the cutting length
• Accessories : adaptor, cleaning brush, protective cap, oil
• Waterproof
IMPOrTANT INFOrMATION rEGArDING
THE NI-MH BATTEr IES OF THIS UNIT
To obtain and maintain the longest battery autonomy possible, allow
it to charge for 16 hours before using it for the first time and then
approximately every three months. Full autonomy of the unit will only
be obtained after three complete recharge cycles.
CHArGING THE APPlIANCE
1. Plug the cord into the appliance and connect the transformer. Before
using the appliance for the first time, allow it to charge for 16 hours.
Make sure the appliance’s switch is in the OFF position.
2. Check that the charging indicator light is lit.
3. A full charge provides a minimum of 45 minutes’ use of the appliance.
4. Subsequent charges should also be 16 hours.
