USE ON THE MAINS
To use the appliance on the mains, plug the cord into the unit. Plug
the appliance, in the OFF position, into the mains, then switch it on
(if the battery is very weak, wait about 1 minute).
IMPOrTANT!
Use only the adapter that is supplied with the appliance.
USING THE TrIMMEr
It is recommended to put the protective cap on the shaver head before
using the trimmer head.
NOTE:
Always put the comb guide on
BEFOrE
turning the trimmer
on, and turn the trimmer off before removing it.
To remove or replace the comb guide, turn off the appliance, pull the
guide up to remove it, press the guide down then turn the dial to put
it on.
To adjust the cutting length of the appliance, turn
the dial.
Activate trimmer mode (picture 1).
You can change the cutting length at any time.
NOTE! Make sure you hold the comb flat against
the skin in order to guarantee an even cut.
USING THE SHAVEr
For greater comfort, set the trimmer head’s cutting
guide to the lowest position before using the shaver
head.
Activate shaver mode (picture 2).
Stretch the skin of the area you wish to shave and
move the shaver head over it, against the direction
of your hair growth.
1
2
