7
NOTE:
If desired, replace the headrest cover before installing the headrest in the vehicle.
1. Using a Phillips screwdriver, remove the two Phillips screws and lift the bottom edge of the
monitor upward. Carefully pull the headrest wires up through the tubes so that the monitor can be
moved away from the headrest.
2. Remove the velcro tabs securing the headrest cover and peel the cover off of the headrest.
3. Replace the headrest cover with the black or pewter cover and secure the headrest cover
by re-attaching the velcro tabs.
4. Pull the monitor cables back out of the tubes while lowering the monitor into position. Hook the
tabs at the top of the monitor into the top of the headrest and align the two holes in the monitor
with the screw holes in the headrest.
5. Insert and tighten the two Phillips screws.
Phillips Screws
Remove Velcro Tabs
Philips Screws
Push
Headrest Cover Replacement
AVXMTGHR9HD Owner's and Install Manual with HDMI 7_6_15.indd 7
AVXMTGHR9HD Owner's and Install Manual with HDMI 7_6_15.indd 7
7/6/2015 3:46:05 PM
7/6/2015 3:46:05 PM
