Gettin
g Started
4
Plug one end of the
included charging
cable into the
DC In
jack on the back of
the camera.
Plug the other end
into the included
power adapter.
Then plug the
adapter into an
outlet or surge
protector.
Step 5: Plug in the camera
Your Project Nursery WiFi Camera needs
strong enough signal from your WiFi router in
order to send its video signal.
Here’s how to test the strength of your WiFi
signal in your baby’s nursery using your
smartphone or other portable wireless device
(like a tablet or iPod touch).
First, go to where you want to put the camera.
Make sure your
smartphone or other
portable wireless device
is connected to the WiFi
network you want to test.
Look at the WiFi icon on
your device screen to
see the strength of the
connection. For example,
on iOS devices look in the
upper left-hand corner of
the screen for the WiFi icon (shown here).
For best results, look for a location with at least
50% strength to use the WiFi camera.
Step 4: Test your WiFi signal
The camera turns on automatically when you
plug it in (the indicator light on its back panel
turns solid red).
