Load the filament
12
For better printing, the end of filament
recommended as showed in the figure.
1. When waiting for the temperature to rise, please
hang the filament on the material rack.
2. Press the spring to pull filament pass through (loose the spring and pull filament back and forth
to see if extrusion pressure is too high or too low; adjust the screw on the force arm if the pressure
is improper).
3. Pull filament into the wire tube; click <automatic input> button beneath the setting to send
filament to the nozzle. Loading is completed when filament are extruded at the nozzle. Filament
can be extruded to the nozzle manually when the printer is preheated.
45°
20
Summary of Contents for Aquila X2
Page 31: ......
