Voxelab Aquila X2, User Manual

Page: 14 / 32

Install the X-axis moving kit and adjust the tightness of X-axis and Y-axis tensioners
6
Step：
1.Implant the X axis kit along the V-wheel into the two ends of Z axis profile (as showed in the above
figure).
2. After installation, move the extruder left and right to check belt's tension. It is recommended that
the extruder can touch X-axis sensor and the belt has elasticity.
Take the first step: assembled components
Take the second step: assembled components
Tips: Manually rotate X axis and Y axis
tensioners to achieve an appropriate
tightness. Refer to A and B: the perfect
distance between the nut and the
screw (protrusion) is 0-2mm, you may
feel a little tension when press the
synchronous belt. Belt too loose will
affect print effect, and too tight will
break.
Back
Front
A
B
A B
！
13