50
A
DJUSTING
THE
S
ENSITIVITY
OF
THE
P
EDAL
If you notice that advancing the ToneLab LE’s
expression pedal does not reach the full effect or
volume even when the Min and Max parameters
are set to the minimum and maximum settings,
or that returning the expression pedal does not
reach the minimum effect or volume, you will
need to perform the following adjustment so that
ToneLab LE’s expression pedal will be able to
reach its full range of operation.
NOTE: When adjusting the sensitivity, you should use
your hand to operate the pedal. Accurate
adjustment may not be possible if you use your
foot to operate it.
E
XPRESSION
PEDAL
1.
Turn the power OFF.
2.
While holding
down the EXP-
CTL-CHAIN but-
ton and the
▲
but-
ton, turn the
power on. The name display indicates EXP
MAX.
3.
Slowly advance the expression pedal away
from yourself (pedal forward), and take your
hand off the pedal when it stops.
4.
Press the GLOBAL button. The name dis-
play indicates EXP MIN.
5.
Slowly return the
expression pedal
toward yourself
(pedal back), and
take your hand off
the pedal when it stops.
NOTE: If you decide to cancel the calibration proce-
dure, press the EXIT/TUNE button.
6.
Press the GLOBAL button.
The name display will indicate COM-
PLETE for one second, and then ToneLab
LE will return to normal operation.
If the sensitivity could not be adjusted cor-
rectly, the name display will indicate
ERROR, and will then indicate EXP MAX.
Repeat the procedure from step 3.
NOTE: If you are still unable to adjust the sensitivity
after repeated attempts, it is possible that
ToneLab LE has malfunctioned. Please con-
tact your dealer or Vox authorized service cen-
ter.
Summary of Contents for Tonelab LE
Page 1: ...Owner s Manual E 1...
Page 59: ......
