Vox Tonelab LE, Owner'S Manual

Page: 48 / 59

48
NOTE: Unlike other parameters, the PITCH parameter
is not edited (while the tone is affected) when
you control it from an expression pedal.
This is so that the pitch will change smoothly
even when MIN and MAX are set to values that
are close to each other (i.e., when you made
settings so that the pedal produces only a
small amount of pitch change).
NOTE: Nothing will be controlled if the target effect is
“OFF.”
The expression pedal target is indicated as fol-
lows.
“*/###### *: Target category, ######: Target
parameter
• Examples
In addition to the examples we’ve shown here, a
wide variety of expression targets provided for
each effect model can be freely assigned to the
expression pedal.
If desired, you can make more detailed settings.
NOTE: For “--OFF--,” “VOLUME,” “M/PITCH,” “D/
INPUT” and “R/INPUT,” operating the expres-
sion pedal changes the tone, but does not edit
the parameter.
5. Turn value knob 2 to make the name display
read “EXP MIN.” Here you can specify the
PITCH value for when the pedal is at the
minimum position. Use value knob 2 or the
▲
,
▼
buttons to adjust the setting.
6. Turn value knob 3 to make the name display
read “EXP MAX.” Here you can specify the
PITCH value for when the pedal is at the
maximum position. Use value knob 3 or the
▲
,
▼
buttons to adjust the setting.
When you operate the expression pedal,
the target parameter will change within
the range you specified here.
NOTE: When you change the expression target, the
MIN and MAX values will be initialized.
7. Press the EXIT/TUNE button to return to the
mode you were in.
NOTE: The changes you make will not be preserved in
internal memory unless you store the program.
E
XPRESSION PEDAL CONTROL INITIAL-
IZATION SETTINGS
(
EXPINIT
)
1. Press the GLOBAL button, then the
®
but-
ton.
The “INIT” setting screen will appear.
“EXP INIT” lets you specify whether the
control data for an expression pedal (i.e.,
the position of the pedal) will be main-
tained when you switch programs.
2. Use the
▲
,
▼
buttons or rotate value knob 6
to change the setting.
If this is turned “OFF”: The instant you
switch programs, the parameter that is
specified as the expression target will
change according to the current position
of the pedal.
If this is turned “ON”: The parameter will
be initialized to the same setting as when
the program was saved (i.e., the control
data will be initialized).
Press the EXIT/TUNE button to exit this
editing operation and return to the previ-
ous mode.
NOTE: The “EXP INIT” setting is not saved in a pro-
gram. This setting applies to all programs glo-
bally, and the setting is saved automatically.
NOTE: If the expression pedal target is “VOLUME,” “D/
INPUT,” or “R/INPUT,” the tone will be changed
according to the current position of the pedal,
regardless of the “EXP INIT” setting.
“--OFF--” --- OFF (controls nothing)
“VOLUME” --- Volume pedal
“P/DIRECT” --- (*: P (pedal)) DIRECT (mix amount
of original sound) for
a pedal effect (e.g.,
OCTAVE)
“M/SPEED” --- (*: M (modula-
tion))
SPEED of a modula-
tion effect
“D/INPUT” --- (*: D (delay)) Input level of a delay
effect
“R/MIX” --- (*: R (reverb)) MIX (mix amount of
reverb) of a reverb
effect