Vox Tonelab LE, Owner'S Manual

Page: 49 / 59

Tuner
Pedals
MIDI/DIGITAL
Factory
settings
Trouble-
shooting
Spec.
Program
List
49
C
ONTROL SWITCH SETTINGS
You can make the following control switch set-
tings independently for each program.
Press the EXP-CTL-CHAIN button to make it
blink, and use value knob 4 to select the effect
you want to control.
S
WITCHING EACH EFFECT ON
/
OFF
NOTE: The CONTROL switch LEDs indicate the on/
off status.
U
SING
TAP TEMPO
TO SET A
PARAMETER
NOTE: The CONTROL switch LED will blink at the
tempo you specify.
E
FFECT CONTROL
NOTE: If you haven’t selected an applicable effect,
nothing will be controlled.
1. Press the EXP-CTL-CHAIN button to make
it blink.
2. To display the control target, press the
® ® ® ®
button four times.
3. To select the control target, use the
▲
,
▼
buttons or turn value knob 4.
4. If you’ve selected MOD TAP or DLY TAP,
press the
® ®
® ® button or turn value knob 5 to
make the name display read “FACTOR”.
Here you can specify the proportion of
SPEED or TIME in relation to the interval of
your taps. For example if you set DLY TAP
as the target, and FACTOR to “1-4,” the
delay time will be set to 1/4th of the duration
between taps.
5. Press the EXIT/TUNE button to return to the
mode you were in.
FACTOR
VALUE KNOB
5
SETTING
If the MODULATION effect’s SPEED parameter
or the DELAY effect’s TIME parameter are
assigned to a control switch, you can set the
MODULATION effect’s LFO SPEED or the
DELAY effect’s DELAY TIME by the interval at
which you press the control switch twice. When
you do so, the interval at which you actually
press the pedal will be applied to the parameter
at a “factor” (i.e., multiple) of 1/6, 1/4, 1/3, 1/2, 2/
3, 3/4, 1, 4/3, 3/2, 2, 3, or 4, according to the set-
ting of the FACTOR parameter (value knob 5).
NOTE: The maximum spacing of your taps can be no
more than ten seconds.
NOTE: If you’ve assigned a parameter other than
MOD TAP or DLY TAP, the FACTOR setting
does nothing.
NOTE: If you change the control switch setting, the
FACTOR parameter is reset to “1.”
• “I/ONOFF” External effect insertion on/off
• “P/ONOFF” Pedal effect on/off
• “A/ONOFF” Amp model on/off
• “AC/ONOFF” Links the Amp model on/off sta-
tus to the Cabinet model on/off
• “C/ONOFF” Cabinet effect on/off
• “M/ONOFF” Modulation effect on/off
• “D/ONOFF” Delay effect on/off
• “R/ONOFF” Reverb effect on/off
• “MOD TAP” Use TAP TEMPO to set the
SPEED parameter of the mod-
ulation effect
• “DLY TAP” Use TAP TEMPO to set the
TIME parameter of the delay
effect
• “FLN TRIG” LFO START TRIGGER of the
CLASSIC FLANGER effect
• “ROT SPD” SPEED SW of the ROTARY
effect
• “HOLD DLY” HOLD of the HOLD DELAY
effect