background image

AMP TYPE

CABINET

TYPE

PEDAL

MODULA

TION

DELA

Y

REVERB

Amp/Effect

35

2. ACOUSTIC

Wanna go “unplugged” without the hassle of 
switching guitars and amps? Enter the acoustic 
guitar simulator — a clever effect that magically 
converts an electric guitar’s sound into that of an 
acoustic. It works best with a single coil (read: low 
output) pickup in the neck position, especially 
when paired with the BLACK 2x12 amp model.
[1] "BODY" ...............................................0.0...10.0

* Adjusts the resonance of the body selected 

via the TYPE parameter.

[2] "BASS" ...............................................1.0...10.0

* Adjusts the bass.

[3] "TREBLE" ...........................................1.0...10.0

* Adjusts the treble.

[5] "TYPE"........................................................1...4

Selects the type of body.
1: M-SMALL Small-size, old body suitable for 

delicate arpeggio technique.

2: G-SMALL Small-size body that features a 

unique mid range loved by coun-
try blues players.

3: T-LARGE

Large-size body that features a 
sophisticated sound suitable for 
pop music.

4: RESO

Body suitable for a resonator gui-
tar for playing slide.

3. VOX WAH

This effect is modeled on two legendary VOX 
wah pedals; the V847 and the V848 Clyde 
McCoy model. Thanks to their unique “throaty” 
tone, these are the only wah pedals many pro-
fessionals will consider stepping on. When used 
wisely, this pedal can either make your guitar cry 
like a baby or howl like a man possessed!
[2] "CLOSE".............................................1.0...10.0

Adjusts the tone when the wah pedal is closed.

[3] "OPEN"...............................................1.0...10.0

Adjusts the tone when the wah pedal is open.

[4] "MANUAL" ..........................................1.0...10.0

* Adjusts the openness (position) of the wah.

[5] "TYPE".................................................847, 848

Selects either V847 or V848 Clyde McCoy 
model as the wah type

[6] "ORDER" ...................... PrE(PRE), PoS(POST)

Selects the connection order. PRE/POST con-
nects the wah before/after the Amp Model.

USEFUL TONE  HINT: 

A great tonal trick that’s employed by many gui-
tarists, including some who are household 
names, is to find a “sweet spot” within the range 
of their Wah pedal and then leave it there. This 
is often called stuck-Wah (imagine that!) and, 
when used tastefully, can be very effective as it 
produces a very distinctive sound that will cut 
through any mix. You can dial in a stuck-Wah 
“sweet spot” with your TONE control in a heart-
beat. Try it, it’s cool...

4. U-VIBE

Modeled on the famous phase/vibrato pedal effect 
unit. This effect simulates a rotating speaker and 
produces a wonderfully seductive and “watery” 
tone. Interestingly enough, the guy responsible for 
this great pedal is also responsible for the birth of 
the remarkable Valve Reactor Technology used in 
the power amp of your ToneLab LE.
[1] "SPEED" .................................1.00...10.00 [Hz]

* Adjusts the speed of the Uni-Vibe effect.

[2] "DEPTH" ............................................ 0.0...10.0

* Adjusts the depth of the Uni-Vibe effect.

[3] "MIX" .................................................. 0.0...10.0

Adjusts the mixture of direct sound and vibrato.

HINT:  If you set up Speed to be controlled by an 

expression pedal, you’ll be able to control the 
vibrato speed just like on a phase/vibrato 
pedal effect unit.

5. BLK/ORG PHASE (B/O PHAS)

This models three models of phaser; a wide-range 
four-stage phaser that was made in Denmark and 
packaged in a black box, a popular four-stage phaser 
that came in a banana-colored box, and a mild-
sounding ten-stage phaser that was likewise banana-
colored. Use the TYPE knob to select the model.
[1] "SPEED" ...............................0.100...10.00 [Hz]

* Adjusts the modulation speed.

[2] "DEPTH" ............................................ 0.0...10.0

* Adjusts the modulation depth.

[3] "RESO" .............................................. 0.0...10.0

* Adjusts the amount of resonance.

[4] "MANUAL".......................................... 1.0...10.0

* Adjusts the center frequency of the sweep. 

MANUAL has no effect if DEPTH is set to 10.

[5] "TYPE" .......................................... bL, Or1, Or2

Selects the type of phaser.
bL:  Danish four-stage phaser with a wide 

range.

Or1:  Popular four-stage phaser in a banana-

colored box.

Or2:  Sophisticated-sounding ten-stage phaser 

in a banana-colored box.

[6] "ORDER" ....................PrE (PRE), PoS (POST)

Selects the connection order. PRE/POST places 
the effect before or after the AMP MODEL.

6. OCTAVE

This effect generates a note one or two octaves 
lower than the one you’re playing, adding thick-
ness and “weight” to single note lines.
[1] "DIRECT" ........................................... 0.0...10.0

* Adjusts the level of the original note.

[2] "1OCTAVE" ........................................ 0.0...10.0

* Adjusts the mix level of the note one octave 

below.

[3] "2OCTAVE" ........................................ 0.0...10.0

* Adjusts the mix level of the note two octaves 

below.

Summary of Contents for Tonelab LE




























































Reviews: