Votex FLV 125, Manual, Page: 28 / 54

Votex FLV
24
8. Scrapping the machine.
When the machine is to be scrapped, you must take the following measures:
-
place a drain pan under the gearbox and drain the oil,
- remove all hydraulic components and collect the oil,
slide the cylinder a few times in and out, and collect the residual oil,
- remove grease from:
-
bearing housings including bearings,
- ground-roller bearings
Remove all rubber and synthetic parts and dispose of them in accordance with the
regulations in force. Dispose of the grease and oil in accordance with the regulations
in force. Dispose of the remaining parts as scrap iron.
Appendix.
A. Ordering parts.
B. Liability and warranty.
C. Notes.
D. Conversion table.
E. Tightening moments.