Votex FLV 125, Manual

Page: 18 / 54

3. Technical specifications
Votex FLV type 125 150 175 200 225
Cutting width in cm 125 150 175 200 225
Cutting height in cm 2-12 2-12 2-12 2-12 2-12
Mass in kg 470 525 590 665 690
Max. mitre in rel. to
tractor centre in cm 105 130 155 180 205
Mounting category I I+II I+II I+II I+II
Mounting Rear Rear Rear Rear Rear
PTO shaft rpm 540 540 540 540 540
For all types, the sound pressure produced at normal operating speed amounts to 94
dB(A), measured at a height of 1.60 m and at a distance of 1 m from the shredder.
4. Transport and storage of the shredder.
Transport of the shredder is to take place with the rotor shaft standing still and the
lateral-movement cylinder (if provided) in the shortest position (mitre position as
narrow as possible).
The shredder (when not coupled to a tractor) may be moved only when the following
conditions have been met:
-
supporting leg in lower position and locked,
- cylinder for swinging the shredder from side to side in the shortest position
(shredder as narrow as possible),
- PTO shaft, if mounted, in the bracket provided for this purpose on the three-
point linkage.
When not coupled to a tractor, the shredder can only be moved by lifting it at a lifting
lug (see pictogram on cutting head). To this end, use a lifting gear having a lifting
capacity exceeding or equal to the mass of the shredder. For this, see the type plate
on the machine.
Place the shredder on horizontal solid ground with a minimum
strength of 400 kPa (approx. 4 kg/cm²).
When the shredder is to be stored, the cylinder must be in its fully slid-in position in
view of the risk of damage or corrosion to the chromium-plated piston rod.
For winter storage, we refer to chapter 7.8.
Votex FLV
14