22
Operation
3.6
Inserting the water tank
After adding the cleaning solution (Kobold GC100 glass cleaner concentrate and
fresh water) and/or emptying the dirty water tank, insert the tank back into the
Kobold VG100 window cleaner.
•
Attach the MF100 microfibre cloth to the window cleaner (see Section 2 .3)
and check whether the microfibre cloth is properly attached to the window
cleaner before you insert the tank .
•
Set the window cleaner with the attached microfibre cloth horizontally onto
the tray so that the rubber lip is in the recess in the tray
1
.
•
Insert the tank into the compartment
2
. Slide the tank into the window
cleaner along the guides until the lock/unlock button engages audibly (with a
“click”).
The tank empties completely as soon as it has engaged in the compartment .
The cleaning fluid that is released is dispersed evenly over the microfibre
cloth .
•
Do not hold the window cleaner at an angle
3
or vertically while inserting
the tank.
Otherwise the window cleaner will drip and the microfibre cloth is
not evenly moistened with the cleaning solution .
•
After inserting the tank, wait about 15 seconds
4
. During the 15 seconds, set
the window cleaner onto the horizontally positioned tray. Otherwise the
cleaning solution will not be distributed evenly and
correctly on the microfibre
cloth!
After 15 seconds, the microfibre cloth is soaked with the cleaning solution and
ready for use.
15 s
4
3
2
1
Fig. 3.8 Inserting the tank
