26
Operation
3.8
Emptying the dirty water tank
The dirty water taken up during the cleaning process is collected in a special
dirty water tank.
The dirty water tank has to be emptied when it reaches the maximum
fill level. Empty the dirty water tank every time the tank is removed
(see Figure 3.13).
•
Remove the tank as described in Section 3.4.
•
Rotate the tank so that both tank openings are facing up.
•
Open the tank by pulling the
grey
rubber closure up.
•
Pour out the dirty water from the container.
•
Rinse the dirty water tank with fresh water and empty the tank again.
•
Close the dirty water tank again with the closure provided.
Fig. 3.12 Opening the dirty water tank
max.
max.
max.
max.
max.
max.
Fig. 3.13 Emptying the dirty water tank
