Vorwerk kobold SPB100, User Manual

Page: 65 / 204

65
Fault Possible cause and solutions
– Alternatively, use the MF600/601 Dry cleaning cloth to remove
any residual quantities of old care products and cleaning
agents.
– Repeat the cleaning process, replacing the cloth if necessary,
until you see an improvement.
– If there is no improvement, carry out a thorough clean of the
floor before continuing to work with the DuoClean.
The moisture film is uneven. It is possible that the tank is empty.
– Check the LED wave symbol on the DuoClean. If it is lit up
yellow, you need to fill the tank, see Removing, filling and
inserting the tank [ } 52] .
– Moisten the cleaning cloth by pressing the function key before
continuing, see Automatic application of moisture and dry
mode [
}
53] .
The floor is getting too wet.
– Set the DuoClean to dry mode, see Automatic application of
moisture and dry mode [ } 53] .
– Continue working without the automatic moistening function
for the time being until the floor appears to be drying.
– Then set the DuoClean to moisture setting 1, see Automatic
application of moisture and dry mode [ } 53] .
If the fault cannot be rectified, please contact Vorwerk customer
service, see
Service [ } 66] .