Vorwerk kobold SPB100, User Manual

Page: 64 / 204

64
Fault Possible cause and solutions
– Change the cleaning cloth , see Replacing the cleaning cloth
[ } 58] .
– The film of moisture does not dry evenly.
– Go over the floor again using the DuoClean in dry mode with a
dry cleaning cloth to remove residual liquid.
The DuoClean cleans edges
insufficiently. It is possible that the cleaning cloth has not been fixed properly.
– Check whether the cleaning cloth is straight and firmly fixed on
the cloth holder frame.
It is possible that the cleaning cloth was not washed prior to first
use.
– Wash the cleaning cloth prior to first use, see After use [
}
59] .
It is possible that the cleaning cloth is too dry.
– Check the LED wave symbol on the DuoClean. If it is lit up
yellow, you need to fill the tank, see Removing, filling and
inserting the tank [ } 52] .
– Moisten the cleaning cloth by pressing the function key, see
Single application of moisture to a dry cloth [ } 54] .
– Also increase the moisture setting if necessary using the
function key, see Removing, filling and inserting the tank [
}
52] .
There is still a thin layer of
dirt on the floor. It is possible that the cleaning cloth is soiled excessively.
– Change the cleaning cloth, see Replacing the cleaning cloth
[
}
58] .
Stain removal is
insufficient. It is possible that the cleaning cloth is soiled excessively.
– Change the cleaning cloth, see Replacing the cleaning cloth
[
}
58] .
It is possible that the cleaning cloth is too dry.
– Check the LED wave symbol on the DuoClean. If it is lit up
yellow, you need to fill the tank, see Removing, filling and
inserting the tank [ } 52] .
– Moisten the cleaning cloth by pressing the function key, see
Single application of moisture to a dry cloth [ } 54] .
– Also increase the moisture setting if necessary using the
function key, see Automatic application of moisture and dry
mode [ } 53] .
After cleaning, the floor looks
tarnished. There may be residual quantities of old care products and cleaning
agents on the floor.
– First let the floor dry completely and, if there is still no change,
use a dry cloth to remove the residue.