Vortice VORT QUADRO dMEV, Instruction Booklet

Page: 11 / 48

Wiring diagrams
Fig. 26 ÷ 29
Maintenance and cleaning
Cleaning/replacement of filters (figg. 30÷32)
The appliance is provided with a filter warning light: when the light turns red, the filter must be cleaned by blowing,
shaking out or rinsing with water* or replaced. In any event, it is advisable to clean/replace the filter routinely
every six months.
*Note: insure the filter is dry before reinserting it.
ENGLISH
HCS FUNCTION
The HCS function is the following:
• Fan switches on automatically at maximum speed (68 m
3
/h - 18,9 L/s - BOOST mode ) the instant that relative
humidity exceeds the threshold of 60%, 70%, 80% or 90%, selectable with the programming button.
• Until the relative humidity drops below the set threshold decreased by 15%, the appliance will continue
operating cyclically, 2h at maximum speed (BOOST mode) and 8h at minimum speed (TRICKLE mode).
• The fan returns to the set minimum speed (TRICKLE mode) and the cycle is interrupted when the relative
humidity falls below the set threshold, decreased by 15%.
• Fan switches on automatically at maximum speed (68 m
3
/h - 18,9 L/s - BOOST mode ) when the sensor
detects a sudden rise in the level of relative humidity (increase greater than 20% in 10 minutes).
• Until the relative humidity drops below the set value decreased by 15%, the appliance will continue operating
cyclically, 2h on BOOST mode and 8h on TRICKLE mode.
• Humidity tolerance: ± 5%
When the fan is activated, the LED blinks for 10 minutes to indicate the set speed.
• Speed 1: led blinks once (LED ON 0,2s / LED OFF 0,2s) at 2 seconds intervals
• Speed 2: led blinks twice (LED ON 0,2s / LED OFF 0,2s) at 2 seconds intervals
• Speed 3: led blinks 3 times (LED ON 0,2s / LED OFF 0,2s) at 2 seconds intervals
• Speed 4: led blinks 4 times (LED ON 0,2s / LED OFF 0,2s) at 2 seconds intervals
• Speed 5: led blinks 5 times (LED ON 0,2s / LED OFF 0,2s) at 2 seconds intervals
The user-settable parameters accessible in programming mode are the following:
PULSANTE
PULSANTE
PULSANTE
PULSANTE
MENU 1
Delay at switching on at
maximum speed (boost) MENU 2
Delay at returning to minimum
speed (tricke) MENU 3
Relative humidity
threshold
Value 1 -
LED blinks one
time
0s
Value 1 -
LED blinks
one time
6min
(default)
Value 1 -
LED blinks
one time
60%
Value 2-
LED blinks two
times
45s
(default)
Value 2-
LED blinks
two times
10min
Value 2-
LED blinks
two times
70%
(default)
Value 3 -
LED blinks three
times
90s
Value 3 -
LED blinks three
times
15min
Value 3 -
LED blinks
three times
80%
Value 4 -
LED blinks four
times
120s
Value 4 -
LED blinks four
times
21min
Value 4 -
LED blinks
four times
90%
BUTTON
BUTTON
BUTTON
BUTTON
11