38
230/1/50
400/3/50
400/3/50
400/3/50
400/3/50
12 VDC / 24 VAC
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
12 VDC / 24 VAC
INSTALLATION OPERATIONS AND MAINTENANCE MANUAL - VORT NRG MEGA-R SERIES
1000
2000
3000
4500
6000
8000
10000
13000
17000
24000
16.1 Electrical data
The following electrical data refer to the basic unit without accessories.
In all other cases, refer to the electrical data in the wiring diagram attached to the unit.
The supply voltage must not vary more than ± 10% of the nominal value and the unbalance between phases
must be less than 1% according to EN 60204.
Please contact our technical department in case these tolerances are not respected.
MODEL
Power supply
V/Ph/Hz
Control circuit
MODEL
Power supply
V/Ph/Hz
Control circuit
Electrical data may change without notice. Therefore, ALWAYS refer to the wiring diagram supplied with the
unit.
16.2 Power supply connection
The electrical panel is located inside the unit and it is accessible through the inspection door interlocked by mainswitch on the
front of the unit (inspection side). To connect the power supply, use the cable gland on the front panel and connect the power
cable inside the electrical cabinet to the disconnecting switch with fuses.
