-
PROF
(NO UK only): settings for operation with time profiles:
P1, used to program one period of operation per day, with a start time, an end time and a fan speed;
P2, used to program two periods of operation per day, each with a start time, an end time and a fan speed. The user can
allocate a different profile to each day of the week.
-
HA
: settings in HA operating mode: available only on appliances with HA module;
-
SERV
: service (option available only to the installer).
Option PROF (NO UK)
Selecting PROF by pressing SET, the settings for time profiles
are accessed. The parameters are:
- En (Enable): possible values are:
ON: enables operation with profiles (and as noted above,
automatically disables any possibility of operation in HA
mode)
OFF: disables operation with profiles.
If EN ON has been selected, the following parameters are
also enabled:
-
ST
: start time, profile P1 interval
-
END
: end time, profile P1 interval
-
ST1
: start time, profile P2 interval 1
-
EN1
: end time, profile P2 interval 1
-
ST1
: start time, profile P2 interval 2
-
EN1
: end time, profile P2 interval 2
-
MON
: allocation of profile to Monday: possible values are P1 and P2
-
TUE
: allocation of profile to Tuesday: possible values are P1 and P2
-
WED
: allocation of profile to Wednesday: possible values are P1 and P2
-
THU
: allocation of profile to Thursday: possible values are P1 and P2
-
FRI
: allocation of profile to Friday: possible values are P1 and P2
-
SAT:
allocation of profile to Saturday: possible values are P1 and P2
-
SUN
: allocation of profile to Sunday: possible values are P1 and P2
22
ENGLISH
esc
set
By-Pass
/ °C
1
2
3
4
5
6
7
FILT
P2
Prg
25
25
P1
HA
