21
Set required room temperature (fig.21)
Before proceeding with the steps indicated below, press the
ESC button to exit and return to the initial menu. The preferred
room temperature can be selected as follows:
- press and hold the SET button
- press the SET button briefly (the current value flashes)
- select the required value using the UP and DOWN buttons
- press the SET button briefly to retain the setting
- press the ESC button briefly to exit.
Activate “bypass” function (fig.22)
The purpose of the bypass function is to ventilate the
apartment without heat transfer. With the bypass valve open,
air can be introduced directly from outside, without passing
through the heat exchanger. The flow of air vented from
inside continues to pass through the heat exchanger. Before
proceeding with the steps indicated below, press the ESC
button to exit and return to the initial menu. The “bypass”
function can be forced by pressing and holding the ESC
button. The corresponding "money box" icon will light up (the
function remains active for 12 hours, after which the
appliance will revert to automatic operation)
User Menu
(fig.24)
Before proceeding with the steps indicated below, press ESC
to exit and return to the opening screen. As a rule, the
parameters relative to the various options are selected by
pressing SET (this causes the current value to blink), then
scrolling through the available values with the UP and DOWN
buttons, and pressing SET again to confirm the new value.
The UP and DOWN buttons are also used to scroll through
the different options or parameters. The main user menu can
be viewed by pressing and holding ESC and SET at one and
the same time. The options of the menu are:
ENGLISH
esc
set
By-Pass
/ °C
1
2
3
4
5
6
7
FILT
P1
P2
Prg
22
22
HA
esc
set
By-Pass
/ °C
1
2
3
4
5
6
7
FILT
P1
P2
Prg
23
23
HA
View time/outdoor temperature display (only NO UK or models with HA
) (fig.23)
Before proceeding with the steps indicated below, press the
ESC button to quit and return to the initial menu.
The current values of the "time" and "outdoor temperature"
parameters can be viewed in alternation by pressing the ESC
button briefly.
esc
set
By-Pass
/ °C
1
2
3
4
5
6
7
FILT
P1
P2
Prg
21
21
HA
esc
set
By-Pass
/ °C
1
2
3
4
5
6
7
FILT
P2
Prg
24
24
P1
HA
