Step 6: Install drain hose
1.Connect the drain hose to the outlet pipe of
indoor unit.
2.Bind the joint with tape.
outlet
pipe
drain hose
drain hose
tape
outlet pipe
drain hose
insulating pipe
●
Add insulating pipe out of the indoor drain hose in order to prevent condensation.
●
The plastic expansion particles are not provided.
Step 7: Connect wire of indoor unit
1.Open the panel, remove the screw on the wiring cover and then take down the cover.
2
.
Make the power connection wire go through the cable-cross hole at the back of indoor
unit and then pull it out from the front side.
3
.
Remove the wire clip,connect the power connection wire to the wiring terminal according
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
NOTE:
●
All wires of indoor unit and outdoor unit should be connected by a professional person.
● If the length of power connection wire is not long enough, please contact the supplier
and ask for a new one. Avoid extending the wire by yourself.
Installation of indoor unit
black
Outdoor unit connection
N(1) 2
blue
brown
yellow-
green
3
panel
screw
wiring cover
51
