77
1
2 POLES SWITCH (DPST)
2
4
3
ON/OFF SWITCH (SPST)
DRY CONTACT FOR ALARM SIGNALLING (250VAC, max current 3A)
POTENTIOMETER
(FROM 5 KOHM TO 10 KOHM)
PCB Control Port Description
---------------------------------------
P0 = Potentiometer 0V = GND
PI = Potentiometer Input Signal = 0-10V
P10 = Potentiometer 10V = +10V
S1-S2 = dry contact for MAX/MIN speed
R1-R2 = dry contact for optional Alarm
WIRING TO AN EXTERNAL STANDARD POTENTIOMETER /
COLLEGAMENTO CON POTENZIOMETRO ESTERNO STANDARD
LINEO 315 ES
1
L
N
2
4
3
PCB/SCHEDA
COVER/COPERCHIO
Notes/note:
Don’t remove wires connected between contacts “N”
and “L” of PCB and contacts “3” and “4” of terminal
block on cover.
Non rimuovere i fili tra “N” e “L” sul PCB e “3”
e “4” sul coperchio.
21
WIRING TO AN EXTERNAL LOW/HIGH SPEED SWITCH /
COLLEGAMENTO A INTERRUTTORE ESTERNO PER MASSIMA E MINIMA VELOCITÀ
LINEO 315 ES
1
2 POLES SWITCH (DPST)
2
3
3
2
LOW/HIGH SPEED SWITCH (SPST)
MIN
MAX
1
DRY CONTACT FOR ALARM SIGNALLING
(250VAC, max current 3A)
COVER / COPERCHIO
PCB Control Port Description
---------------------------------------
P0 = Potentiometer 0V = GND
PI = Potentiometer Input Signal = 0-10V
P10 = Potentiometer 10V = +10V
S1-S2 = dry contact for MAX/MIN speed
R1-R2 = dry contact for optional Alarm
PCB/SCHEDA
Notes/note:
Don’t remove wires connected between contacts “N”
and “L” of PCB and contacts “3” and “4” of terminal
block on cover.
Non rimuovere i fili tra “N” e “L” sul PCB e “3”
e “4” sul coperchio.
22
Summary of Contents for LINEO 250 ES
Page 68: ...68 1 2 4 5 6 ...
Page 70: ...70 2 1 A 10 11 ...
Page 72: ...72 1 2 3 10A 11A ...
Page 73: ...73 12 15 Ø14 mm Ø16 mm 13 LINEO 315 ES L N LINEO 250 ES 14 14A ...
