25
Alarms MENU
Press the
button in the main display screen to access to the alarm menu. ALM PAGE will be di-
splayed. Press the SET key to view the alarms in progress. Two types of text will be displayed:
- No ALAr: No alarm present.
- ALM Alxx: Indicates the presence of an alarm, where xx indicates the error code. For further information,
see the Alarms Table section.
There are two types of alarms: those with manual reset and those with automatic reset, and both will be di-
splayed in the alarm menu. Once the conditions for which the alarm has occurred have been restored, if the
alarm has an automatic reset, the alarm will reset itself without the user having to intervene. With manual
reset instead:
- Use the
buttons to go to the alarm page to be reset.
- Press and hold the
button for about 2 seconds.
At this point, if there are no other alarms, the message "No ALAr" will be displayed, the alarm icon will turn off
and the machine will return to its regular operation, or the page relating to the subsequent active alarm will be
displayed.
To exit the menu, press the
button.
Alarm history MENU
This section contains the history of the alarms stored by the controller:
- Press the
button for 2 seconds to access the USER menu.
- Then press the
buttons to select the HIST menu and press
to access it.
This menu lets you view the alarm history.
The ALARM HISTORY page shows the last alarm.
Press the
button to view the previous alarms.
Repeat this procedure to scroll all the elements in the alarm history until the first alarm is displayed. Display
of the alarm history is circular.
To exit the menu, press the
button.
Maintenance operator/installer MENU
In this section, it is possible to access the menus reserved for MAINTENANCE OPERATOR / INSTALLER
level settings.
Press the
button for 2 seconds to access the USER menu.
Then press the
buttons to select the desired menu and press
to access it.
These menus are password-protected and therefore a password is requested before accessing them.
Press the
button, then press the
buttons to select the password and con-
firm with the
button.
To exit the menu, press the
button.
CAUTION:
Changes to these parameters will result in a change that is not approved and dangerous for ope-
ration of the unit. Contact authorised personnel only!
ENGLISH
