24
CMP compressor status display
On these screens, it is possible to view if the following are present or not:
- Dehumidification request “dEH”
- Humidity set point “SEt”
- The status of the compressor “StS” (“—-” = compressor disabled, “ALrM” = compressor alarm, “ MAnU” =
compressor in manual operation, “ tOn” = compressor awaiting start-up, “On” = compressor on, “tOFF” = com-
pressor awaiting shut-down, “OFF” = compressor off)
- The status of the digital output of the on/off compressor, the status of the condensation valve in air “Air” and
the status of the condensation valve in water “H20”
H20 water valve status display
On these screens, it is possible to view:
- The status of the water valve (“—-” = valve disabled, “OFF” = valve closed, “On” = valve open).
DAMP damper status display
On these screens, it is possible to view:
- The status of the recirculation damper “rEC”
- The status of the outside air damper “StS” (“—-” = damper disabled, “OFF” = damper closed, “tOFF” = dam-
per closing, “On” = damper open)
- The percentage of opening of the modulating outside air damper “AO”
PROB probe status display
On these screens, it is possible to view the status of the sensors, indicated with the following messages:
“trE” = T.ambient/recovery, “tOd” = T.outside, “tUA” = T.water, “tEH” = T.exhaust, “HUM” = Ambient humidity,
“FAn” = Remote fan potentiometer input value.
ENGLISH
