Vortice CNU Instruction Booklet Download Page 16

16

Safety

• Follow safety instructions to prevent damaging the user. 
• Do not use the device for any function other than that specified in this booklet. 
• After removing the product from its packaging, ensure that it is not damaged. If in doubt please contact a pro-

fessionally qualified person or authorised Vortice Technical Assistance Centre. 

• Never leave packaging parts within reach of children or disabled persons. 
• The use of any electric device requires compliance with a few fundamental rules, including:  Never touch it

with wet or humid hands. Never touch it when barefoot. 

• Do not use the unit in the presence of flammable substances or vapours such as alcohol, insecticides, gasoline,

etc.  

• Store the device away from children and persons with disabilities when you decide to disconnect it from the

power supply and not to use it any more. 

• Take precautions to prevent gas coming into the flue pipe or from other open flame devices from entering into

the room.

• The device may be used by children over 8 years old and persons

with reduced physical, sensory or mental capabilities, or lacking in

experience or necessary knowledge, as long as they are supervised,

or after they have received instructions for the safe use of the device

and on inherent dangers. Children must not play with the unit. Clea-

ning and maintenance to be carried out by the user must not be per-

formed by children unless supervised.

• Do not make changes of any kind to the unit.  
• Maintenance instructions must be followed to prevent damage to and/or excessive wear of

the device.

• Do not leave the device exposed to adverse weather conditions (rain, sun, etc.).  
• Do not rest objects on the device.  
• Internal cleaning of the product must only be carried out by qualified personnel.  
•  Periodically  check  device  conditions.  If  imperfections  are  noted,  do  not  use  the  unit  and

immediately contact an authorised Vortice Technical Assistance Centre.  

•  Promptly  contact  an  authorised Vortice Technical  Assistance  Centre  in  the  event  of  unit

malfunction  and/or  failure  and  request  the  use  of  original  Vortice  spare  parts  for  any
repairs.  

• If the product falls or receives a strong blow, immediately have it inspected at an authorised

Vortice Technical Assistance Centre.  

• The device must be installed so as to ensure that no one can come near its moving or live

parts during normal operating conditions. 

• In the event of:  device dismantling, using appropriate tools, heat exchanger removal, motor

module  removal:  the  device  must  already  be  switched  off  and  disconnected  from  the
electrical mains.   

• The electrical system to which the product is connected must comply with regulations in

place. 

•  Only  connect  the  device  to  the  mains  supply/  electrical  outlet  if  plant/outlet  capacity  is

suitable  for  its  maximum  power.  If  otherwise,  immediately  seek  assistance  from  a
professionally qualified person.  

• Switch off the main switch on the system when: a malfunction is detected, you decide to

perform external cleaning maintenance, you decide not to use the device for short or long

ENGLISH

Warning:

this symbol indicates that care must
be taken to avoid injury to the user

!

Caution:

this symbol indicates that care must
be taken to avoid damaging the appliance

!

Summary of Contents for CNU





























Reviews: