In order to complete the kit you will need the following
( check mark against each once you collect the items ) :
o
Screw Driver
o
Metal Ruler
o
Marker Pen
o
90 deg Set Square
o
Hot Glue gun and glue stick
o
Clear Packing Tape
You also need a clear and a flat table/surface or floor to work with. This is very important.
Having a flat surface will ensure your build goes straight and true.
You will also need the following to fly :
o
1 Nos 2200mah 3S Lithium Polymer Battery
o
1 Nos Lithium Polymer Battery Charger.
o
4 Channel or above radio set ( Tx and Rx )
About Coroplast
Coroplast, or Coro, which is a name given to
Fluted PolyPropylene sheets, is a lightweight,
sturdy, resilient material. Coroplast sheets has
parallel flutes which make the sheets very light
and strong and crushes, instead of breaking upon
impact. Coro bonds extremely well with
CyanoAcrylate, and epoxy. These characteristics
make it suitable for RC applications.
Some building techniques and styles are unique to building RC planes using Coro and can impart
even greater strength when used properly. Please read below and understand :
●
Coro has higher strength perpendicular to the Flutes than Parallel to the flutes. Try it on
a piece of scrap. Its easy to bend the material in the direction of the flutes than in the
other side.
●
Coro, when crushed can reduce strength. Be careful to not crush the flutes when
building .
●
When cutting coro, parallel to the flutes, always cut in between the flutes using a new,
sharp knife/blade. When cutting perpendicular to the flutes, cut in multiple passes
taking care to not crush the material.
www.Vortex-RC.com
5
Summary of Contents for VT-AllRounder
Page 35: ...www Vortex RC com 35 ...
