Series S36 Instruction Manual
Chapter 3 Operation
3-4
800120
Programming the Flow Meter
1.
Enter the Setup Menu by pressing the
ENTER
key until prompted for a password.
Note: all outputs are disabled while using the Setup Menus.
2.
Use the keypad to select the password characters (1234 is the factory-set password).
When the password is correctly displayed, press
ENTER
to continue.
3.
Use the Setup Menus described on the following pages to customize the multi-
parameter features of your
SonoPro
®
Flow Meter. (The entire lower display line is
available for entering parameters.) Some items depicted in the graphic on the
preceding page may not be displayed based on flow meter configuration settings.
4.
To activate a parameter, press
ENTER
. Use the keypad to make selections. Press
ENTER
to continue. Press
EXIT
to save or discard changes and return to the Run Mode
screen.
5.
Program the UNITS menu first because later menus will be based on the units
selected.
6.
Next program the Calibration menu to obtain information needed for installing
the transducers as described in Chapter 2.
Summary of Contents for SonoPro Professional S36 Series
